PET packaging belt manufacturers

- May 06, 2019-

PET packaging belt is also known as plastic belt. It is made of polyethylene terephthalate as the main raw material. It is a new type of environmentally friendly packaging material used in replacing steel belts in the world. After several years, the development of new materials has been successful and the cost has dropped significantly. It has been used in the steel industry. Fiber industry, aluminum ingot industry, paper industry, brick kiln industry, screw industry, tobacco industry, electronics industry, textile industry and wood industry; It is a new type of high-strength packing belt that replaces the steel belt. It is currently the most widely used steel belt in the world.

Specification: Width: 16-25 mm Thickness: 0.5-1 .2 mm


Its characteristics are:

1, high strength: PET packaging material is(polyester). Strong tensile resistance. Steel strip close to the same specification. Several times that of ordinary plastic belt.

High toughness: PET packing belt has plastic properties. It has special flexibility. During the transportation process, it can avoid the dispersion of objects due to the fracture of the packing belt caused by bumps. Ensure the safety of transportation.

3, safety: PET belt does not have the sharp edge of the steel belt. There is no need for steel buckle combination, no indentation, scratch problems. It will not cause damage to the packaged object. No harm is done to the operator when packing and unpacking. Avoid all unsafe factors.

4, adaptability: PET belt due to material and production process factors. It can be suitable for various climate changes. High temperature resistance, moisture resistance. Unlike steel belt dampness and rust pollution environment and loss of tensile resistance. Make the bundle strength reduced.

5, environmental protection: Due to the light quality of PET belt, easy to handle; Small volume. Save warehouse space; Used PET tape for easy recycling. Compliance with environmental requirements.

6, beautiful type: steel belt will be exposed to the air to absorb water and rust. The rust permeability is strong and easy to contaminate the packaging. PET plastic belt is beautiful, not rusting, favorable to environmental protection.

7, temperature resistance: melting point is 260 °C. Use invariable below 120 °C and maintain tension for a long time.

Economy: The length of 1 ton of steel belt is equivalent to 6 tons of steel belt. The unit price per meter is lower than that of iron belt. The cost is only 60 tons of iron belt.


Previous:No Information Next:An economical packing belt|Special packing belt for carton factory