2019 ADHESIVE PACKING TAPE WITH ANTI-AGING
2019 transparent tape representative product
Normal: 40mic, 45mic, 48mic , 50mic etc.
Normal: 45mm, 48mm, 50mm, 72mm etc.
Normal: 50m,66m,100m,100y,300m,500m,1000m etc.
or as yourrequirements
as your requirements
can be printed 1-6color mixed for logo
Dependsonyourquantity,usually 10-12 daysafterdepositreceived
30% deposit before production,70% by sigh of B/L
The main methods to judge the quality of tape are as follows:
First look at the thickness of tape paper tube. the thickness of standard paper tube is in 3mm.
Look again at the diameter of the paper tube. the standard diameter is 7.8cm/2, smell the smell of the tape, if the smell is strong or smelly, it indicates that the quality is not good.
Check the surface of the tape, including whether the tape is sticky to the hand and whether there is a gap on both sides of the tape. Good quality tape on both sides does not stick to the hands,And there's no gap.
Check whether there are bubbles on the surface of the tape. there will be no bubbles in the good quality tape coiled very tightly. of course, if it is a new factory tape, there may be a few bubbles.
Check the tension of the tape, if the tape is particularly easy to break, it is inferior.Good tape with a better transparent film is not easy to break.
Knowledge of hot melt adhesives for raw materials
Hot melt adhesive (Hot Glue) is a kind of plastic adhesive, its physical state changes with temperature in a certain temperature range, but its chemical properties remain unchanged, its non-toxic and tasteless, is an environment-friendly chemical product.
Because the product itself is solid, convenient for packaging, transportation, storage, solvent-free, pollution-free, non-toxic type; as well as simple production process, high added value, high bonding strength, high speed and other advantages, it is favored by human.