Tape is very popular and supported by consumers in our lives, but it also plays a big role, but do you know what the production process of our tape is like? The tape wholesale below will be popular for everyone!
1. The whole process of tape production is: from the raw material of plastic particles to the film blowing machine, blown into a plastic film, the width is generally about 1.3M. According to the use of the tape, then select different plastic particles and add some special additives.
2. After the film is blown, the film is applied to the coating machine to apply glue. In fact, this process is mainly based on the viscosity and use of the tape to select the glue. After the coating, the tape is applied. However, the current one is still It has a width of 1.3M and a length of several hundred M with a large roll of plastic film, which is not separated.
3. Next, it is necessary to re-roll the large-volume plastic film into a small roll of film through the winder, which can be re-rolled according to the length of the tape we usually use.
4, the rewinding of the small film can be further cut by the slitter into the width of the tape used in the usual time, such as 1CM width or other width is acceptable. The most important part of the tape production to see the quality is blowing The two processes of film and coating. Because these two processes are semi-finished products, and the subsequent rewinding. The effect of slitting on the tape is relatively small.
Q: What do you need to know about the paper corners to get the price?
A: You need to know your length, width, height, whether you need to print, and some special requirements.
Q: How do you save the paper corner?
A: It is recommended to store in a dry and cool warehouse.
Q: What are the transport methods for paper corners?
A: You can choose sea, air, express, different timeliness, and the price is different.