Everyone knows the tape. If you accidentally stick the wrong thing with the tape, tear off the tape and there will be residue, which is ugly and sticky, which is very inconvenient. Now, Linyi Wanshun tape tells you how to clean up these residues:
When there is not much residue, it can be washed with water and then slowly scraped off with a small blade.
When there are more residues, use a rag to dip the alcohol (no alcohol can be replaced by wind oil), and slowly wipe it. After the viscosity is removed, slowly scrape it off with a small blade.
Furthermore, it is difficult to eliminate the couplets, stickers, etc. that stick to the door during the Chinese New Year. You can use rubber or kerosene to wipe off the adhesive tape, then buy a can of transparent varnish, dilute with banana oil, and return to the light with a brush.
Q: What is the raw material for paper corners?
A: The paper corner material is yarn tube paper and cattle cardboard and glue. Please be assured of complete environmental protection.
Q: What do you need to know about the paper corners to get the price?
A: You need to know your length, width, height, whether you need to print, and some special requirements.
Q: How do you save the paper corner?
A: It is recommended to store in a dry and cool warehouse.
There are many types of tapes, and there are many kinds of adhesives on the surface. Therefore, the performance and strength of various brands of tapes are different, so the following factors should be considered when purchasing tape.
The microporosity of the desired adhesive:
Since the adhesive action of the tape occurs, the moisture of the adhesive on the surface of the tape penetrates into the adhesive after the adhesive of the adhesive tape, and is quickly dried to make the adhesive tape become a part of the adhesive.
Therefore, the microporosity of the surface of the desired adhesive is very important for the selection of the adhesive tape. If the microporous property of the adhesive is large, the moisture absorption force of the adhesive is large, and the adhesive tape is rapidly condensed, and the adhesive tape having a slower condensing speed is used. Or tape containing more adhesive.
Tape surface adhesive:
In the manufacturer, the tape is coated with an adhesive on the bottom tape. Usually, it is fully dried and then rolled into a roll. If the adhesive tape is too moist, the tape itself will stick tightly together. It is difficult to open when used, and some cannot be used at all. use.